VORON Design
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!
3dCase's latest activity
-
3dCase replied to the thread Chaoticlabs cnc full rebuild.Its working, now onto improvements. How do I load videos here? -
3dCase replied to the thread New 3D Printer User Seeking Help.Well it is moving in the correct direction. If the motor moves the wiring is correct imho. I do not believe it could move at all if the...
-
Thanks to all for the asnwers, again. I do appreciate the help. So, I have made some progress. I am now getting: EndstopSTEPPER_XOPEN...
-
3dCase replied to the thread Chaoticlabs cnc full rebuild.Hmmmm, canbus is working and hotend works. HE fan does not work so possibly a wrong pin, bad connection or….. Strangely the bed also...
-
3dCase replied to the thread New 3D Printer User Seeking Help.Oh really? Just one sensorless, that is weird for me but also a possibility I suppose, although I do not see the logic, it is not my...
-
3dCase replied to the thread Chaoticlabs cnc full rebuild.From a build table full of parts it got to this 😍 All the parts installed and all wires found a route and a little nest to sit in. Now...
-
-
3dCase replied to the thread Finally, bought a 2.4 r2 KIT.You will be ok, like @NoGuru said, all work but some are just better. Also some are simply different in components. When it is running...
-
It will be fine, all kits work and some are just better then others. Build what you have and then after its done see where you want to...
-
3dCase replied to the thread New 3D Printer User Seeking Help.I think he hasn’t because it was not the intention. The machine never has worked yet but it came with limitswitches installed, thetefor...
-
3dCase replied to the thread New 3D Printer User Seeking Help.If you cannot find the colour layout for you motor, there is a simple trick you can do. Disconnect the motor and rotate with you...
-
3dCase replied to the thread New 3D Printer User Seeking Help.It could get the common and V from those pins at the moment but as @shiftingtech mentioned it looks like the wrong pin. Also if this...
-
If it were me, I'd depin it and put those in a proper 3-pin connector. It's not that hard and a good skill to have (you'll need it).
-
3dCase replied to the thread New 3D Printer User Seeking Help.In my opinion it is best to try and get it to work as close as the original person intended. After that you can change things and you...
-
3dCase replied to the thread New 3D Printer User Seeking Help.And those pins do not look like they line up, the are probably sliding down the side of the real holes. I would change that plug either...
-
That photo you've got there concerns me a little: the (I assume) endstop appears to be a 2 pin connector jammed into a 3 pin port. so...
