Recent content by ArtyBlartfast

I suppose it must be so. If I zero that corner, then the front corner on the same side becomes unzero'd to a similar amount. If I then tighten the front corner (left), then the right front corner becomes similarly unzero'd.

Here's the only corner I can't zero. Is this too much racking?

Aahhh, I see now. This part doesn't bother me, I'd rather be able to lift the panel then have to turn the whole unit on its side. (Space Limitations) As for the insulation, since heat rises, I don't know that putting insulation on top of the panel is going to help much. It's like putting a...

I understand the insulation gets in the way, but I don't understand why you can't lift the panel unless the nozzle is very close to it. Do you have a picture of this to share? I still haven't even gotten my plastic parts yet, so there's time to change my plan.

Okay, West3d is great. They modded my order with no charge. >>> >>>We can absolutely do that for you, don't worry about the extra charge. >>>Best, >>>Aaron

I'm sold. That gif makes it pretty clear how useful this mod is. I'm going to see if I can add this instruction to my order of the printed parts. Thank you all!

Hi All, I just ordered during this Labor Day Sale an LDO RevC kit from West3d for a Trident 300 cube. Now I'm reading comments and I see several ppl saying the "Inverted Electronics" mod is almost mandatory. Is it really that useful, and will it require different parts (I ordered the printed...

I'll let you know. The funs about to start.

Okay, then it's you. You are the one whose advice I followed last night and ordered my LDO Trident RevC kit from West3D. (It happened to be on a Labor Day Sale $150 off and the Raspberry Pi boards are back) I couldn't resist. Thanks for helping me pull the trigger. :)

So, even tho the V2.4 is about the same $$$, you'd choose to build a Trident over a 2.4? (I've got the same circumstances)