Recent content by B20bob

I am. I've managed to get mine more reliable by really tightening the Z belts and going back to the normal micro switch Z endstop from the unklicky one. I still get the error once in a while but thankfully it's been much better. I'm gonna look into those CNC ones you mentioned though. Do you...

Ok so after some time messing with this thing I have now replaced the klicky-SB adapter with a freshly built beefed up modded version. I also replaced the PCB Klicky with a freshly built unklicky (heatset version). At first it again seemed like the issue was resolved. I did about 5-10 prints to...

Good idea. I did check this part by trying to wiggle it with my fingers but I think I'll take the toolhead apart and check the screws while I'm waiting for my PCB klicky to get here.

Thanks a lot for the reply. I didn't notice any perceivable movement in the probe when attached to the toolhead and probing, but of course with the tiny tolerances here I probably wouldn't be able to see it with my bare eyeballs anyways I guess. I have a PCB klicky on the way now so I'm hoping...

Hey guys, I'm having an issue on my 2.4r2 350mm. It has been printing great for about 454 hours but now I am constantly getting "Probe samples exceed samples_tolerance". So I built a new klicky probe and replaced the microswitches in both the Z-endstop and the klicky-NG (New switches are...