VORON Design
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!
Recent content by Blindsquirrel
-
B
Troubleshooting Layer Shifts
Must have been a fluke. Its still doing it. Please see my attached printer.cfg file. Thank you- Blindsquirrel
- Post #8
- Forum: Slice and Print
-
B
Troubleshooting Layer Shifts
My Z limit switch vibrated loose. Once I reinstalled it and re-calibrated the probe everything seems to be working great again.- Blindsquirrel
- Post #7
- Forum: Slice and Print
-
B
Troubleshooting Layer Shifts
Thank you! I found my belt routing error. Everything is tightened at 150mm. Now I have a new issue. Printer will home fine but when it starts to print it slams into the the back right corner and keeps trying to move that direction until I press the emergency stop or unplug the printer. My X and...- Blindsquirrel
- Post #5
- Forum: Slice and Print
-
B
Troubleshooting Layer Shifts
My issue appears to be #8. As I push my Y axis towards the back my head moves to the left or negative direction. What should I be looking at?- Blindsquirrel
- Post #3
- Forum: Slice and Print
-
B
Troubleshooting Layer Shifts
I marked most of my drive pulleys with a sharpie so I could see if they turned on their shaft indicating a loose grub screw.- Blindsquirrel
- Post #2
- Forum: Slice and Print