Recent content by capnzosima

Hmm possible new theory - when playing with the z steppers with power off, I can pretty easily roll the wheels on 3 of them to get the z-axis to move up and down. But the fourth (Back right one when looking at the front of the machine, will not move at all by hand. Perhaps it's resistance is too...

I get no errors when checking the endstop states, or when manually pushing the endstop. The issue seems to be with the Z Stepper I'm seeing variable results. Sometimes I get this error when it lowers all the way to the z endstop: More commonly I'm seeing a crash as soon as it tries to LOWER...

OK here is what I think the error is:

Which log files in particular - I looked in klipper and moonraker logs. Is there another I should be looking at? I'll check the cables. After a few reboots and manually jogging gantry, Now I'm getting: Unable to read tmc uart 'stepper_z' register MSCNT once it hits the sexbolt.

Running a 2.4 350 based on the LDO kit. Has been printing successfully for a while. Just did a bed mesh recalibrate (I was seeing some first layer issues on one part of the bed) After restart, I can no longer home the Axes without the printer ding emergency shutdown. X and Y axes home...