Recent content by cdh

You do the same z offset procedure as you'd do for almost any printer: https://docs.vorondesign.com/build/startup/#z-offset-adjustment

My z_offset is set to -0.1

I'm using Preset 1. This is the config for the probe: [probe] pin: !headZ x_offset: 0 y_offset: 0 #z_offset: 0 speed: 6 #lift_speed:30 samples: 2 samples_result: median sample_retract_dist: 2.0 samples_tolerance: 0.01 samples_tolerance_retries: 15 activate_gcode: G4 P200 # Wait 200ms...

According to the LEDs on the board, I'm using Preset 1

It's working quite well. It's taken a few rounds of figuring out what setting to run it on so it's sensitive enough to register contaact, not so sensitive that it triggers all the time, and not so insensitive to flex the bed into oblivion. Bed meshing shows a slight incline from left=>right...

FINAL UPDATE See the Serial Transfer Requet on Reddit Thank You!!! RCF for neglecting this poor machine and giving it away so I could have the opportunity to (re)build a switchwire Jason from LDO Motors for the awesome blue filament he gave away at Reno VICE DOC for the Revo Voron PZ Probe...

The X and Y can share a ground wire, but they should otherwise be wired separately.

Holding for a future update In this update: Z-Probes Toolheads! The last of the red parts CAN bus Undercarriage Cleanup New fan and RPI mounts Cleanup wiring First Print! Still to be done: Wiring for enclosure lights Enclosure panels: black ABS needs to be polished first Nevermore Mini...

UPDATE #2 First things first... let's pull out all the unneeded wiring Here lies: All the toolhead wiring except 1 pair for the X endstop (for testing) Extra power wires that ran from the power supply to the SKR for some reason A mosfet that automatically powers the case LEDs when the board...

For those that we're not at Reno VICE 2024, RCF raffled off the original Switchwire. It's seen better days, and is not currently in working order. I was specifically instructed that no serial transfer would occur until this thing is up and printing (hopefully with a little less rust). Initial...