Recent content by chubwagon

Your settings look correct... make sure you have a cleanly formatted SD card and that you renamed the firmware file correctly (klipper.bin renamed to firmware.bin). To me that Marlin device ID looks like it didn't take the flash. https://docs.vorondesign.com/build/software/octopus_klipper.html

I'm using the standard Z endstop with the pin that falls out when the machine is flipped upside down, as well as the Omron PL-05 in the toolhead from the BOM. I did run into a small issue with an idler so my printer is down at the moment. Going to install TAP here once the parts come in...

I 100% agree with m00dawg. My thought was get the printer printing, then mod as I want, but get a running machine first. It's just a lot easier to troubleshoot in my opinion when you're running stock to start with, both from finding your own solutions by search and if you ask for help. My two...

I just finished my Trident build between the holidays (had everything except wiring done in May, then got busy lol) and I am also running the Pi4/Octopus V1.1/2209 setup. The stock fans, especially the exhaust and the two electronics cooling fans in the skirts are really noisy. Being able to...