VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Recent content by Eremius

  1. Eremius

    Question Config parameters as variables?

    I am configuring the klipper_z_calibration mod for use with my euclid probe. It looks like the config file for the mod wants a lot of data duplication of info that are available in other config files. It seems like the smart way to do this would be to be able to access the data as a variable...
  2. Eremius

    Protect your klipper printer (mainsail), password, ssl, firewall rules

    I would bet something in your rewrites is screwing up your connection. Possibly start by commenting them out one at a time?
  3. Eremius

    Protect your klipper printer (mainsail), password, ssl, firewall rules

    Instead of just turning off http it might be a better idea to just redirect it to https Your config would look like this: server { listen 80 default_server; server_name _; return 301 https://$host$request_uri; } server { auth_basic "go away"; auth_basic_user_file...
  4. Eremius

    what flavour?

    I'm a fan of prusaslicer. There seems to be a ton more development resources put into it and Voron/Klipper is now natively supported.
  5. Eremius

    Question First Build Advice please

    I may be the odd man but I had no luck with canbus. It is a whole learning curve unto itself. I would suggest getting all the bugs worked out and get comfortable with your printer before you start exploring canbus.
  6. Eremius

    Migrate to an umbilical

    I was using an RS485 canhat with a HUVUD board. It would work for a little bit but would become disconnected after sitting for a while.
  7. Eremius

    Migrate to an umbilical

    Yes, I have a toolhead board. (West3D) I just don't want to run it back through the drag chains when there is a better option available.
  8. Eremius

    Migrate to an umbilical

    It is afterburner. I am actually converting back from canbus as I had terrible luck with it. So it would be the full 14 wires.
  9. Eremius

    Question Filament Battles- What is your experience with esun ABS+ (not ABS)

    eSun ABS+ is nice to print in. I have found it to be a little easier than straight ABS. The secret sauce in ABS+ is PLA.
  10. Eremius

    Migrate to an umbilical

    I have a 2.4r2 350 and I am looking to get rid of the drag chains. Can someone suggest a file (or files) for: 1) Attaching the umbilical to the head 2) Attaching the umbilical to the rear gantry without the use of specialty cables 3) moving x/y endstops Bonus points if this is an all-in-one...
  11. Eremius

    HUVUD to DFU mode?

    I am attempting to get my HUVUD into DFU mode but all I can mange is a slow blink. Where am I being stupid? I have the jumper over the set of pins closest to the PB10|11|12 header, I have the usb cable plugged in and I plugged power into the CAN umbilical.
Top