VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Recent content by eriks

  1. E

    Sometimes PCB klicky probe is unreliable

    for anyone dropping by, the main issue was loose closed z-belts on my voron. all measures i did starting with CNC toolhead, MGN12, Carto, belt tension (z-belts), ne idlers, twisted x/y comp, thermal compensation could not solve it. Root cause why they were loose? i don't know yet, i have some...
  2. E

    Sometimes PCB klicky probe is unreliable

    Single MGN9 mod ... updated to MGN12 -> bed and first layer is super now, some other issues came up... never ending :-)
  3. E

    Sometimes PCB klicky probe is unreliable

    Yes, i just found out that the taco moves with the spring sheet. Root cause not yet identified…
  4. E

    Sometimes PCB klicky probe is unreliable

    Said. Done! So upgraded to Cartographer USB, works like a charm. But i guess i found out now that i have some other problem, trying to figure out but kind of helpless now. Doing a scan of my bed, without print plate comes out quite well (my guess), hightmap shows a range of 0.109mm. But when i...
  5. E

    Sometimes PCB klicky probe is unreliable

    somehow i keep buying new parts for this machine, without ever coming to a point where i can say: now i can print without watching it :P Challenge now: im running an EBB36 with USB (as i had massive issues getting it up and running with CAN), which works wonderful. thanks!
  6. E

    Sometimes PCB klicky probe is unreliable

    Sorry for the late reply, did not find any time to work on it. Probe accuracy tests: https://github.com/sporkus/probe_accuracy_tests And yes: Problem still existis with CW2, Filametrix mod, new klicky... when hot QGL aborts due to too many retries..
  7. E

    Sometimes PCB klicky probe is unreliable

    Sorry, that was little confusing. -> -no, when probing the endstop there are not retries due to tolerance, not with the nozzle, nor with the body of the clicky. Will send a quick update how it is with a new afterburner / clicky combination. Currently building the filametrix mod. :)
  8. E

    Sometimes PCB klicky probe is unreliable

    there is no difference for my pinter between cold, hot, soaked... :-( what i have found out today by accident during z-calibration (first the nozzle goes on the endstop, then the body of the microswitch -> after that i do not have retries. will print a new mount and body for clicky and see if it...
  9. E

    Sometimes PCB klicky probe is unreliable

    Thanks, will have a deeper look into that. Did a probe test with unsatisfying results. min max first last mean std count range drift test...
  10. E

    Sometimes PCB klicky probe is unreliable

    Hey lord-carlos, could you figure it out? I have similar problems and im out of tries. (it was working fine for a long time...)
Top