Recent content by Fabreeko

do you have any other filament, PETG is tough to tune. Its easier to rule out any problems by seeing if you can print this with another filament type.

When i first built my v2.2 i had this happen a lot, i just got in the habit of bringing the rear part of the gantry up manually before turning the printer on. First time i saw the QGL fail because of this i was super lost 🫣, took me an hour to realize its a common occurrence.

I know many of you have been waiting for this toolhead, Preorders just opened up and we expect to ship them out in 12-14 days hopefully if there are no delays. This is the same as Nitehawk SB but in a different form factor for a more universal fit and also has USB passthrough for things like...

Its because most rails these days are Stainless Steel, the extrusions are aluminum and we need to add a 3rd metal to counteract heat expansion. Titanium is the lightest one of them all with the right properties to function as a backer. the GitHub is full of great tests made by Whooping.

im not sure but maybe try reaching out to sparta 3d they are an LDO reseller in CA and might have some spare parts for you.

Its usable but not the standard configuration. like others have said SKR 3 is meant for 5 drivers, the Trident needs 6 but you can get away with it by running a Can or Nitehawk toolhead which has a driver built in for the extruder. they basically function like their own mini MCU, SKR 3 would...

End of month sale (welcome summer?) -15% off all Honeybadger parts code HB15 Includes PEI beds, aluminum beds, bearings, rails, heaters, fans, and even Rook kits! -10% off milo cnc parts & bits! with code Milo This includes the Fabreeko Fixture plate for milo, ldo cnc bits and makera...

Hey Guys, here is a quick comparison between the 2.4 and the trident, mostly to help those new to Voron understand the differences and what they do. https://www.fabreeko.com/blogs/news/voron-v2-4-or-trident-which-one-is-right-for-you

Quality fans right there :) we have 3 versions of the 5015 depending how much cooling you need, some of them require the 3rd pwm pin to be installed for it to work properly. the standard 2 wire one works like normal fans with pwm control but flows better than most 5015's at that rpm.

You are making me blush ☺️

Like others said, ABS+ is a blend of abs and other things. I think it may have some petg in it. Pro’s: -easy to print -low warping if any -beautiful mat black look when printed at the right temp Cons: -layer adhesion strength -lower heat deflection than pure abs -requires more cooling when...

Fabreeko's Father's Day Weekend Sale! This Father's Day, skip the ties and socks and get Dad something he really wants! Fabreeko has the deals to make his heart (and his 3D printer) sing. Check out our special offers: - 25% off Filamentum: Use code 25Filament at checkout. Because nothing says...

100 hours sounds low for wiring problems, maybe internally in the motor or something. Try extruding a large amount and wiggling cables near the toolhead and the wire chain to see if it does that sound. That should narrow it down. Ive also seen some of these pancake motors be weak where you...

For beds in germany check 3do.dk they sell Honeybadger which is manufactured by us. Try to get a semi satin or textured bed they work great with abs. Fermio makes great parts so that should not be the issue, the 8500 on the fan sounds average and should work good enough. Is it a 24v fan...

That’s a new one! I feel like we need a CUD sticker now 😂