Recent content by garrettwp

I ordered parts from KB3D and their pulleys were gates brand. Their pins / shafts were cut and fit perfectly in the pulleys. There will be some tolerances and a drill with sandpaper can adjust the pins to fit better.

Have you modified your macros recently? If so which ones? How about any changes to your slicer profile. Have you printed without issue before?

The error tells you exactly what is missing. Did you include the klicky bed mesh macro and add it to be included in the config?

The link you posted is for 5m (16ft 4in). You will need to order 15-16 quantities of the item to equal 250ft. As for colors, it is your choice many buy black and put heat shrink tubing on the ends to mark out the colors. Others will buy black and red to separate the power. I went from using...

The original poster is looking for the carriage holder that allows to remove the carriage from the rail without worrying about losing the bearings from the carriage.

I run one on my V0 and it’s been working well. Newer boards do have more port options, but the expander is a good solution for those running older boards like the SKR Mini e3 v2.

Are you running mainsail or fluidd? What hardware are you running. More details would be helpful.

I just picked up a few spools of their ASA. This will be my first time using Polymaker and ASA. For the cardboard spools, I printed some spool rings that greatly reduce the friction of the spools. Any tips in printing their ASA? Temp, etc Cardboard Spool Insert

Everyone please see issue 44 on the canboot github for a fix for the u2c not allowing CAN flashing to the EBB. BTT has an updated firmware that I tested and verified working. https://github.com/Arksine/CanBoot/issues/44 For anyone who wants to reproduce this. Download the file from bigtreetech...

Check the Voron 2.4 GitHub under electronics_bay. Here is the link. https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/Other_PS_Mounts/UHP_350_Mount_x2.stl

FYI, you may want to add the bed mesh / adaptive bed mesh to your print start and not your G32, just in case you want to run G32 to Home the printer and not call the bed mesh in the process.

You can check out Fabreeko, they have some options available. Also Sparta3d (Canadian) but ships to US and their sparkle abs / Asa is nice. Price comes out to 23 a spool with shipping (bought 6 two weeks ago). Wife likes the pink. I’ve only used ABS and not ASA, but it’s on my list. Maybe...

I am not sure if there is an exact one that is made for tap mgn9 for mgn12, but there are a few on printables.com. Search “mgn12 carriage“

You need ASA which is ABS with UV additives that will hold up better under the elements and sun.

I’ve noticed that if the first layer is not right, it can stick too well to the plate and can be a pain to remove of the pieces are lower in z height.