VORON Design
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!
Recent content by killface
-
K
high (?) extruder motor temperatures (during and after printing)
isn't the driver part of the 2240 board? wouldn't the temps be more similar between EBB NTC and Extruder (not the hot end extruder temp, the other one that I didn't purposely put in my printer.cfg)- killface
- Post #3
- Forum: Electronics
-
K
high (?) extruder motor temperatures (during and after printing)
I'm still working kinks out of my 2.4 and have a question about safe temps in the chamber. I've been tuning ABS filiment, so doors closed. I have my print start macro and slicer set to have everything start printing w/chamber temp min of 40c. Everything stays pretty stable as the first...- killface
- Thread
- Replies: 3
- Forum: Electronics
-
K
Rapido UHF mod for Stealthburner
this is kind of old thread, but this is how I did it / will post back if it fails...so far so good