Recent content by martinklaus

It's absolute not working, I am trying it for weeks. I need help with it and not sure how I should get it. Not sure if it's the frame or the esun parts are to soft. The problem is not the squareness, but if I'm starting to tight the belt it's racked or uneven tight.

I'm still not able to derack the gantry in the right way. I removed it completely and aligned everything correctly again. I will try to build it in again this days. The step with aligning the screws holes on the gantry is challenging me. Maybe the screw on the x join was to lose, the two were...

Square difference between the side is les then 1mm. I ordered ploymaker filament, I'm done with esun. Hopefully is not hat visual that the black is different. I had a really good print after derack and I tried to make it even better an made it worse again. I will to it again when I'm not sick...

The problem with square frame I have from the first day. I bought 3 frames from different manufactures, the problem was every time the same. It was never like this, I screwed two profiles together and never got a right angle like in the video. Should I try to buy a LDO frame again? What fan...

This video from Nero is completely useless and not working for me. The bells are not lose enough in my printer and no matter what I'm doing, the right back corner is still bouncing. But if this is the case, then in the front it should be the left side, but this is fine. Forgot also about the...

1. You have a good PEI in mind that I can order in Germany. I reduced the offset a little bit regarding the brim was between 0.21 and 0.22. The first layer has different height regarding where you're measuring. I'm not sure about the bed from fermio labs. Maybe get a better switch...

Hello voron users, I'm struggling to get my voron 2.4 really working. The problems addressing different arrays of my prints. I have an voron 2.4 with 300mm with following problems: Bad first layer bed adhesion on complex parts with holes, like the stealthburner body part. Bad overhangs that...