Recent content by ndisa44

I am running a Rapido HF hotend with a CHT nozzle, so I hopefully will be able to hit some higher max speeds. I also don't plan to go for the absolute max speeds possible, but a little extra speed is always welcome. I'd be happy with around 300mm/s and decent print quality where I can slow it...

I purchased a Fystec lightweight X beam for my 300mm Voron 2.4, and as I am building the printer I am learning that these beams are not as good as they sound. Certainly they are lighter, but I have heard that some people find that they do not work as well on larger printers as they do on the...

@kubik I picked 225 on the temp tower because it had the least stringing and best overhangs. I'm running 235 now, seems better, same amount of gloss as 225. I tried increments of 5c all the way up to 255 on that same part and there wasn't a ton of difference, but 235 seemed the best. Adding in...

I'm running 225 because that's what looked best on a temp tower. I will give higher temps and a bit of cooling a try.

It's an old Qidi Tech x one 2 with a full metal hotend swap. Hatchbox abs at 225 with the bed at 105. No part cooling, and 60mm/s speeds. Standard settings for printing the voron parts

I'm printing parts to build a voron 2.4, and I'm having some very odd issues. I am printing with an enclosure and heated bed. For some reason the walls on all of my parts are not straight. Does anyone have any suggestions on how to fix this? I'm worried that this will cause problems for...