VORON Design
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!
NoGuru's latest activity
-
NoGuru replied to the thread Upping my umbilical game.Glad to assist! I have an SLS XOL toolhead I have never put into use. I would like to hear how you like it? Maybe someday I will get... -
By the way, your printer config proved incredibly helpful for getting my sensorless homing working on my 2.4. The key turns out was my...
-
NoGuru replied to the thread Fine Tuning the First Layer.Bed is too close and you are over extruding. So make sure you are micro tuning. I do this by making the first layer like you did and...
-
-
NoGuru replied to the thread Question help with artifacts on print.If this is only on one face you have a loose wire in the loom. I bet you are getting a tiny lose in connection to the extruder or motion...
-
NoGuru replied to the thread FYSETC 2.4 R2 Pro + CNC upgrade.I am pretty sure there is no version specific to FYSEC. Just print the latest one from the Voron repo. https://vorondesign.com/voron2.4
-
NoGuru replied to the thread Dimensional Accuracy.This is your Bible or tuning. https://ellis3dp.com/Print-Tuning-Guide/?mwg_rnd=6783062
-
Coming along nicely, taking my time to enjoy the build, and putting off the day I have to deal with the electronics… First off thanks...
-
NoGuru replied to the thread FYSETC 2.4 R2 Pro + CNC upgrade.I started building Vorons at age 45 so you can do this too. If you get stuck, there are lots of us here to assist.
-
NoGuru replied to the thread Question BTT Octopuis Pro with H723.I would start a new thread for this and post your config for the motors and steppers.
-
NoGuru replied to the thread Phoenix Anticipation.You have to decide that based on needs and wants.
-
Oh thank you!! I had that opposite I guess. I thought I had to raise voltage, whoops! Yeah I'll give this a read, thanks for sharing!
-
NoGuru replied to the thread Upping my umbilical game.You can try and drop voltage when homing. Here is an example of my config. If you look, I drop my X by .59% and Y by .60%...
-
NoGuru replied to the thread Your opinions about KISSlicer.I see. Well the last update to the software was May of 2023 so not a good sign. Hope you find the info you are looking for.
-
NoGuru replied to the thread Your opinions about KISSlicer.Only slicer I ever paid for was Simplify3D because it was great at supports. But with all the free ones that are amazing like Orca and...
