VORON Design
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!
Onewayne's latest activity
-
hey everyone, I decided to give the nhk a go, mostly for the ability to run beacon without another cable but at this point it def... -
Onewayne replied to the thread Tridentish 300.Idle Hands Steppers buzzed Sensorless working and adjusted. Beacon installed and calibrated. PID tuned hotend and bed. Rotation...
-
-
Onewayne replied to the thread Tridentish 300.The dreaded flick the switch and pray for no smoke. Its alive Took about 5 or 6 reboots to clear the klipper complaints , its nice...
-
-
Onewayne replied to the thread Tridentish 300.Parts finally arrived for the next step. Gantry - Monolith 2wd 9mm belts Steppers - steppersonline 17hs19-2504s-h-v1 2.5amp Pulleys -...
-
-
Onewayne replied to the thread Tridentish 300.Im stuck waiting on parts for the gantry so jumped to the toolhead to get it done, this wont be the actual toolhead when the build is...
-
-
Onewayne replied to the thread Tridentish 300.Finished up the skirts which took some work, the doomcube stl files on the github are not modeled for a 300mm machine, theres 250 and...
-
-
Onewayne replied to the thread Tridentish 300.All parts are being printed on my other Trident which makes life so much easier, when I built my first Voron it was with a creality CR6...
-
-
Onewayne replied to the thread Tridentish 300.The Frame Dimensions - x500 x y500 x z670 Build volume - 300x300x300 2020, 2040 and 4040 extrusions machined by dllpdf mfg and powder...
-
-
I build better printers than build logs and that will become evident rather quickly. I will post infrequently and forget to post...
-
