Recent content by Ranayna

I do not straight out dismiss anything made in china. Otherwise i would not have much electronics :D It should be said a bit different: It is cheap crap that i have problems with. And much cheap crap comes from china, since so much stuff in general comes from china. But the reverse is not true...

I'm sure these connectors can handle the amperage. Even when generously de-rated (something you should always do for "chinesium" products) the connectors should be able to handle that. But there are other quality aspects. The quality of the plastics for one. On related articles on Amazon i saw...

I agree. Especially since i am in 230 volts land. That bites :D But now the question is: Are there any of these types of connector with appropriate approvals? D3-9 seems to be the only one that at least has some ratings, even though CE is not worth all that much to be honest.

I considered the Z Locks, but for now i don't need them anymore. All the belting is done now, the gantry feels reasonably squared, finer adjustments will be done once the electronics are finished. My next step is the Stealthburner.

Doesn't this essentially come down to the steppers? Steppers have a finite resolution, round can not really be round, ever. Now i am really curious how the Bambu gets this roundness.

This is something i stumbled across while researching Voron printers: https://www.teamfdm.com/forums/topic/740-xy-moves-make-more-sound-than-they-should-but-found-a-unexpected-solution-took-only-20-hours-or-so/ Maybe worth a try, since you also have inverted the direction of your steppers.

No, i am not following this guide, although i have read that already. I am still in the process of building the printer, and am on page 122 of the manual, after attaching the joints and adding the 4 Z belts, the manual tells me to "square the gantry" by moving it to the back. And there i notice...

So, i went ahead and redid the frame anyway. And it turned out that my workbench was not as flat as i tought. I also noticed, with a bright light in the background to see the edges of the profiles better, that the profiles move quite a bit when tightening the screws. I was careless on the first...

Hi, i am in the process of building a V2.4, the LDO Motors Kit, with CNC Parts from Chaoticlabs. So far, i am impressed with the quality and especially the documentation. But i hit a snag when i try to square the gantry. I suspect what the issue is, but i would like confirmation before i undo...