VORON Design
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!
skyguynca's latest activity
-
Sskyguynca replied to the thread My switchwire gone crazy.According to all the linux and like groups, these usb 2.0 cameras have caused alot of issues and errors and there are some with work...
-
Sskyguynca replied to the thread My switchwire gone crazy.Ok, so now I know what happened. I have everything up and working again flawlessly. It is totally amazing and so simple. I never tied it...
-
Sskyguynca replied to the thread My switchwire gone crazy.Well sorta did that already. Like in the first post the Voron Cube and the Benchy printed fine. I did a couple of others and they...
-
Sskyguynca replied to the thread My switchwire gone crazy.I checked the grub screws and belt tension 3 times when I re-calibrated after each crash. When I say crash that what it is. You hear and...
-
SI finished my switchwire a few weeks ago. I have about 80 hours of printing without problems. I was using cura but switched to orca...
-
Sskyguynca replied to the thread Having problem homing X.About normal for belt tension. I have tried replacing steppers, drivers, different sensitivity settings different slots on the board...
-
Sskyguynca replied to the thread Having problem homing X.[include mainsail.cfg] #[mcu host] #serial: /tmp/klipper_host_mcu [mcu] serial...
-
SI have something weird happening. My switchwire is using a skr 1.4 turbo, 12vdc, sensor-less homing on X and Y with a probe on Z, other...