Recent content by voidtrance

I would really get the Klipper devs involved with this. It is my understanding that no matter how the MCU is reset, it will boot the flashed Klipper firmware. The firmware, itself, might have some basic default definitions on how to set pins. It seems odd that the MCU firmware will be leaving...

Depends on how you are wiring them. Where is the power coming from?

It's actually not recommended to use CNC parts instead of the printer ones. The STLs that are provided by the Voron devs are sizes to take ABS shrinkage into account. Therefore, the pure dimensions in the STLs are a bit oversizes. If special care is not taken when creating the CNC parts, they...

Not to pile on the responses but I use my own custom adaptive bed mesh script and I've never had any issues with exclude objects. But since my script is external, it doesn't run the risk of accidentally messing with Klipper in any way.

If you have a serial, there is a #documentation-open channel on Discord. Otherwise, you could may be post to #voron-electronics. As for Klipper, it has a discord server where you can report issues.

I've been looking at the Klipper code for the motion sensor and it seems that the way it works is: The filament sensor toggle the switch_pin every so often. I don't know how often that is since I am not sure that BTT document it. On every toggle, Klipper updates the filament trigger point to be...

How does the printer know what it has loaded? Do you store the filament type from the previous print?

If this is truly the case, you should bring it up with both the Voron docs guys and Klipper so the documentation will be updated. I am fairly certain that this would be a welcomed safety precaution.

Instead of (or along with) using the chamber temp, SuperSlicer also has the [filament_type] variable, which you can pass to your PRINT_END

Isn't this the default behavior. On my printer, every time the MCU looses connection with the PI, the hotend fan turns on to max. When Klipper reconnects, it turns off.

What mods a worthwhile for the stock build is somewhat of a personal choice. However, you post title is "Day 0", which to me means "what mods should I include as part of the build". To that question, my opinion is "none". Build stock, get to know you printer and then mod. The only one that I...

Can Klicky get it's own sub-forum? Having a single thread for ALL klicky questions is not much different than just using Discord. There will be so many parallel conversations that it will be difficult to keep track. I think that Klicky is big and common enough to where it deserves it's own...