VORON Design
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!
wirehead's latest activity
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.Prelude to first print… I washed the Formbot-provided flexplate with dish soap because I figure if I’m going to screw up a flexplate...
-
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.Okay, so we started last weekend with zero working printers and ended up with zero working printers. Let’s see how this weekend goes…...
-
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.I dono, I've tended to order 6-8 contact screw terminals and split them on the dovetail to get down to 2-pin versions because at least...
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.Yeah, I'll probably do the same, assuming my soldering iron has enough heat output for the job. I'm assuming that they designed it in...
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.Oh yeah, a Dragon Burner is high on the list of mods once it's working.
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.Ansible provisioning I don’t have the energy to turn this into a proper Ansible tutorial that’s generic enough to be safely shared so...
-
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.One of my friends was visiting a while ago and we were doing the “parallel play” thing where we were both working on different stuff the...
-
-
Wwirehead replied to the thread VORON TOWER.So, not talking you out of this, but I ended up building a really nice and very flexible shelving unit out of extrusion, and it's going...
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.Summary I’m assuming that the MiniSB is probably one of the trickier bits of assembly with all of the interlocking parts. There’s a...
-
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.As I said last update, it feels like I’m reaching the end of the build? I grabbed the manual and the remaining parts and was able to...
-
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.I wanted to laser-cut the piece for a lower rear panel with a 8010 MCU fan and my friend-and-fellow-tinkerer CraftySorceress happens to...
-
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.This work session aligned to the 8th anniversary of Voron’s release PSU mounting I’ve found a few options for mounting the PSU not...
-
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.From a conversation with a nice lady who dropped off a giant metal albatross for me to add electronics to that I’ve been working on in...
-
-
Wwirehead replied to the thread Voron 0.2r1 from the Formbot kit.From a conversation with a friend who I was offering my skills as a 3D printer mechanic to, reminding her that it’s both easy and fun to...
-
-
Wwirehead replied to the thread Voron V0.2 Formbot kit.Oh my, one of those semi-notorious Avnet printers as the previous printer! I have a few Pi's already so I am figuring that I'll use a...
