Recent content by X11-35/2

Hi Guys, I often get told to get a Tap instead of auto Z Klicky and want to give it a try. Have you guys experiences with the CNC ones? Chaotic labs maybe? Also: is there even a Cnc Klicky which uses the optical sensor, instead of an optical micro switch? I'm open for your experiences and thoughts

I was able to find out something more about the error. First I got a Misumi X Extrusion, which didn't do the trick, but than I tried flipping the Linear rail. here is the Result. Still not perf but a bit better.

@claudermilk yes i did

@120decibell okay thank you. @Le0n I'm using an inductive probe, so the glass wouldn't trigger it, but I did further investigations on cold printer with normal setup (mesh 221130.1) on cold printer with normal bed, magnet, springsteel, magnet, bed I have laying around (mesh 221130.2) looks like...

1. yes, in inconsistent squish, leading to a uneven second layer which leaves strange gaps in the outer shell 2. what do you mean with how big? die middle to the corner is about 0.04. also strange is that the bed falls along the y plane even with z tilt about 0,04mm 3. 0.6 and I also calculated...

So here is a Mesh, Picture and raw data: #*# [bed_mesh 221129.18] #*# version = 1 #*# points = #*# -0.005000, 0.008125, 0.020000, 0.028125, 0.026875, 0.019375, 0.013125, 0.003125, -0.003125, -0.010000 #*# 0.006250, 0.016875, 0.030625, 0.041875, 0.040000, 0.030000, 0.021250...

Hi there, I've just finished my Trident Build& have done a few hours of printing now, about 45h, not even done with all the "cosmetics" like Skirts etc. So also no Cerials for me.... Sadly I'm relatively unhappy with the flatness of my mesh. About my Setup: Trident 300mm Probe: Super Pinda aka...