What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Trying to build my own machine from scratch, self source

hexagon

New member
I'm trying to build a 3d printer with capabilities to print complex parts like chainmail and standalone rubick cube as well and sprint mechanisms and others, I'm looking for 0.15 cleavage and 0.1mm res on the X and Y axes with 0.1 or sub 0.1 layer height, for it I'm gonna use a rigid bed set up with linear rails for the x and y axis for the gantry and triple screw for the Z axis, 0.9°NEMA for XY and single step for the lead screws and I want it to handle overhangs really well so I wanna get an enclosure (Ikea DIY) and radial fans I have made a basic BOM which I will send in soon but it is a budget build for around 550 USD excluding the frame and I'm willing to sacrifice some features to meet the budget but I still want an ideal machine for the price
 
Y no replies ;-;

You made a series of statements. you didn't actually ask any questions, or do anything else inviting a response, so it's not actually very clear what response you were hoping for.
 
Ah I see, fair enuf, I was jus asking for advice, I'll send the BOM with a much clearer msg later, prob on a separate message, thanks a bunch
 
Top