Voron 0.1 Firmware Setup

[mkurej7]

Printer Model

Voron 0.1

Extruder Type

LGX Lite

Cooling Type

Other

Hey Guys !
Im searching for Help here..
I Want to set up my Voron 0.1
I am not very experienced with Klipper or Mainsailos.
I Build the Firmware exactly like it should be till this point

if i write in this command it doesnt show my board..
Does someone know why or maybe can help me with that..?
Regards Michael

 

[claudermilk]

Try just issuing ls /dev/serial/by-id/ as instructed on this page: https://docs.vorondesign.com/build/software/configuration.html

 

[mkurej7]

Try just issuing ls /dev/serial/by-id/ as instructed on this page: https://docs.vorondesign.com/build/software/configuration.html

Thx M8 it somehow worked now.
I tried another Method and it worked!

 

[mkurej7]

Im Having another issue now tho..
My Y Stepper Motor makes terrible noises and i think it has problems to move i made a Video so you can see what i mean.
The thing is it turned out that the Stepper Motors where wired wrong so y axis moved when i tried to move x. i did not build this printer myself )
Obviously it didnt run correct this way when i tried to home the printer. But back then everything ran smothe! No noise no clicking whatsoever…
So i changedvthe pins correct bow on the board snd everything runs the right way but yeah .. i am having this issue like i explained…

 

[mkurej7]