Recent content by BallisticTech

There's like 3-4 Formbot V0.2 Build logs on this forum. I have this github for the Formbot V0 Kit: https://github.com/SrgntBallistic/Formbot-V0 I have a detailed review of it here: And streamed the entire build in a series here...

Thanks. I have a few woodworking tools in my garage but this is definitely a 3D Printing and electronics focused space.

It wasn't the premade cfg from my github was it?

I'm just starting to play with CAN for an Enderwire build I have planned. Was watching a tutorial and it shows this command as a way to query a CAN boards UUID ~/klippy-env/bin/python3 ~/klipper/scripts/canbus_query.py can0

My fabreeko cPIF parts did include the filament info as pictured above. I was also able to talk to my PIF provider on Discord. I think generally in the PIF process you'll be able to talk to the provider and find that out.

Do you use the dfu-util command directly or the make flash command?

It was ESUN Black as of April 3rd 2023. I've heard some folks have moved away from ESUN. So might have to reach out and ask in the Voron Discord PIF Channel

I believe the DFU Util error is a known problem and mentioned in the V0 Display Docs https://github.com/VoronDesign/Voron-Hardware/blob/master/V0_Display/Documentation/Setup_and_Flashing_Guide.md

There's a user mod for a V6 collar mount. It just clamps it into the Mini SB. Hard mounting with screws is def preferred from what I've read

I think it actually goes down to the start of the heatbreak with or without the Adapter. The Adapter purely allows V6 dimensional and mounting compatibility IIRC

I believe on the Dragonfly BMO you have the red collar mount is a removeable adapter that isn't necessary. It's recommended to hard mount hotends in Voron printers. After removing the Adapter you should see there are threaded holes on the top of the heat sink that will allow you to hard mount...

Kirigami Bed Issues Cont'd I ended up using the non-stealth version of the Nut Block after initially trying to file a way a bunch of material to get the stealth version to fit. From what I can tell the differences in the parts are purely aesthetic. The stealth Chain Mount initially worked after...

Stream #3 Frame Part 1 https://youtube.com/live/OC4Tmijx1vw?feature=share I really thought I would get much further with this part of the build. But moving through the manual and reading every instruction meant the process went a bit slower than I thought it would. This is my first frame build...

Formbot V0.2(r1) Kit Info I've got a Github with documentation like a base config (with driver currents, and pins already set up) here: https://github.com/SrgntBallistic/Formbot-V0 A full series of build streams here: https://www.youtube.com/playlist?list=PLwWNdxHVFVf1DbI2nGngUB0O9TWeXn2Sx And...

I've got a Github with documentation like a base config (with driver currents, and pins already set up) here: https://github.com/SrgntBallistic/Formbot-V0 A full series of build streams here: https://www.youtube.com/playlist?list=PLwWNdxHVFVf1DbI2nGngUB0O9TWeXn2Sx And a final review here: I...