Recent content by Deeelta

Finally I have received drivers from BTT - they work with no issues. Compare the status they give with status Chaofang drivers give: Chaofang: DRV_STATUS: 80190000 cs_actual=25 stst=1 BTT: DRV_STATUS: 80150000 cs_actual=21 stst=1 Can't see any logic why it doesn't work

I bought different, just in case. And to be even more sure about compatibility I bought right from BTT. They arrive Friday or Saturday. Jumpers - yes, in UART mode. I tried to use (by jumpers) STEP/DIR mode, but can’t find where in settings set using that mode

Yes, 500*500*1000 printer. So I was thinking maybe because of size motors loaded too heavy, and driver stop due overloading by current - so I set it current limit to 1.6A (nothing changes). Motors are 17HS19-2004S1 from Stepperonline, with A+ A- B+ B- wires order. As I can see at Voron and...

Using spots accordingly to official manual: the last one spot on Octopus is empty. Drivers are Chinese Chaofan factory, no any schematics is available, but if you have any idea about wrong soldering of any pins - I have multimeter to check.

Hi guys. I spent 3 weekends on attempts to google out the problem, but failed... Trying to start just built Voron 2.4 with BTT Octopus Pro 429, TMC2209. I'v tried to start with newly burned SD card without updates as well as tried to install all the updates Mainsail shows - all with same...