Recent content by Jqw767

Great, thanks. I saw that the manual shows the outline of the Omron proximity switch, but as it‘s not explicitly described I wanted to go the safe route.

Sticking with the Omron TL-Q5MC2-Z from my formbot kit (I have backup Omrons…) in my Canbus BTT SB2240 build for now. Wondering two things: 1) option of 12 or 24V… as Omron runs from 10-30V I would go with 24V to be closer in the „middle“… or any benefit of 12V here? 2) connecting the Omron...

Hi Vornoneers, my Voron 2.5 350 is continuing to be a fun and exciting journey. Most prints come out beautifully, and finally after I‘ve correctly routed the belts there is no more skipping, layer shifts, etc. I do however see vertical lines as artifacts on all rounded outer shells. These are...

Can confirm, it worked! A 3h print just finished! thanks a million, the pics really helped.

Great suggestions! grub screw -> check! Tested it and re-loctited. That was not it though belt path -> will re-re-check Edit: ok… you kinda solved it with the pictures :) it seems I was so arrogant when I re-belted that I actually re-belted wrong a second time! The pics you provided pushed me...

Hi Voroneers, after Reddit went private in the middle of my Troubleshooting a couple of days ago I still experience severe layer shift on the x/y axis on my pretty new Formbot 350mm 2.4. Below you can see the problem description, things I‘ve tried and a couple of pics. Problem description: -...