Recent content by marucci78

nothing custom, printed the normal parts and fastened thats all. I was starting to use my CW2 that came with my 2.4 kit on another printer with the SB2209 and found that I do need a adpater when using CW2 but not with G2.

I now have 27 hours of print time with PLA without any issues so I think its safe to say that the jumper cap for the 120r was the problem, thank you guys for your input.

Well I think I found the issue, I changed the RJ11 connector and same thing, I went to change the toolhead cable, looked at the board and decided to change the 120r jumper cap...I thought about it and when it happens my Knomi stays on so it must be a communication issue, not power loss so took a...

I just got another sb2209 rp2040 delivered today so the plan is to replace the RJ11 first, my umbillical is strain reliefed and has no hard bents in it...I have tried flexing it, pulling it, wiggling it, you name it without replicating the issue, but if the RJ11 doesnt fix it I will replace the...

Whats up guys Im new here and new to building printers, I just finished my 3rd printer build in 3 months......0.2r1, Micron+, and 2.4 r2 350. I have a strange issue on my Voron 2.4 r2 350 with the CAN set up, I have a Octopus 1.1, BTT pi, and SB2209 rp2040, CAN bus bridge to BTT pi, sb2209 to...