Recent content by matt777

I turned the printer off while the toolhead was in the back left corner. Then I homed the toolhead and the only thing I can hear is weird motor noise (because the toolhead is in the corner) and the toolhead won’t move into the middle position. Just see the video: https://streamable.com/7rxgad...

Turns out the issue was truly a swapped CAN cable

I want to setup the SB2209 (RP2040) Can together with the btt octopus board. I followed this guide. Basically my problem is exact in this step. After flashing the SB2209 with katapult i get no UUID. I also read the instructions in the red stop sign. I quadruple checked all settings - katapult...