Recent content by mime

Thank you! That was the reason. For reference, changing the config section of the pin to this solved the problem: [pwm_cycle_time beeper] pin: EXP1_1 value: 0 shutdown_value: 0 cycle_time: 0.0005 ; Default beeper tone in kHz. 1 / 0.0005 = 2000Hz (2kHz)

I'm running a Trident I built from a Formbot kit one year ago. Recently, I upgraded the toolhead to CAN bus using a BTT SB2209. My Mainboard is a BTT Octopus F446. I have a BEEP macro in my config like this: [gcode_macro BEEP] gcode: # Parameters {% set i = params.I|default(1)|int %}...