Recent content by Nosmo

First print!!

Yesterday was the big day, wiring the beast and first movement. Formbot includes a complete wiring package in their Voron kit so wiring was pretty easy and straight forward. All wires are individually labeled and come pre terminated with the right connectors. The wiring of the Stealthburner...

Made a lot of progress today. Most electronics are tested and working including the Canbus interface for the Stealthburner. Also the gantry is build and hanging. Core A and B belts are in and the print bed is installed. A 350x350 print bed is huge compared to the 215x215 build plate form...

Finally, my Formbot kit has arrived. They couldn't ship my 300mm kit due to customs issues, but they had 350mm kits in stock in the Czech Republic so they asked if I wanted a 350mm kit instead. So, my 300mm build is now a 350mm build. The kit needed to be approved by the inspector first...

My plan is to setup and test the CANbus kit and the Klipper screen while I'm waiting for the kit to arrive. If I don't succeed in getting everything running before I start with the electrical installation of the printer then I'll do a standard installation. The Klicky probe has a low priority...

First time Voron builder here and anxiously waiting for my Formbot kit to arrive. This will be my first Voron but not the first 3D printer that I have build. So what am I going to build? I have ordered a 300x300 350x350 Voron 2.4 kit from Formbot and some mods. a E3D Revo Voron a...