Recent content by Onewayne

Hey Brian, ya that’s the issue with running insulated , my average is 70c so the nitehawk will hit triple digits more than likely , I can easily hit 80 and above running the bed hotter. I would love to use the nitehawk for the ease of install. I was toying with going back to canbus since my...

I agree and would swap it out if I was going to keep the nitehawk but it won’t last in the heat now that I’m finally insulated but I would have liked to figure it out , I did push it running full throttle at 25k accel and 50mm3/s and the failure was still random and didn’t show any clues it was...

Possible and I did think about that although I would think more people would have similar issues and the cable supplied seems to be well made . I tossed it back in the box , for 40 bucks it’s not worth chasing and now that I’m paneled up and insulated it won’t last 10 min so it’s back to xol pcb...

Yep you’re correct in identifying something that has zero relevance to anything , bravo.

More Juice So I figured out how to wire things up, its actually fairly simple although I was about to wire it though the board with 48v and not directly to the drivers so im glad I asked for help! Made a new mount for the 2 power supplies which now that im further along will have to again be...

hey everyone, I decided to give the nhk a go, mostly for the ability to run beacon without another cable but at this point it def wasnt worth it. This is a brand new build and the nhk worked as expected through all preliminary tests and configurations ie input shaper, PA, flow , max vol, all...

Idle Hands Steppers buzzed Sensorless working and adjusted. Beacon installed and calibrated. PID tuned hotend and bed. Rotation distance set. Shaper_calibrate all good go. quick PA tower. Everything runs and runs really well , input shaper graphs were textbook and really good, print quality...

The dreaded flick the switch and pray for no smoke. Its alive Took about 5 or 6 reboots to clear the klipper complaints , its nice that I know what they are usually and know how to fix it without help these days and before to long we booted into klipper. I did have to remember how to setup...

Parts finally arrived for the next step. Gantry - Monolith 2wd 9mm belts Steppers - steppersonline 17hs19-2504s-h-v1 2.5amp Pulleys - genuine Gates Bearings - West3d berzerker flanged 695 Belts - Gates G2 EPDM 9mm Belting monolith was actually really easy, I remember having some issues...

Im stuck waiting on parts for the gantry so jumped to the toolhead to get it done, this wont be the actual toolhead when the build is further along since the one im planning to run isnt released yet but ive seen it and know its going to be better than everything available at the moment, its all...

Finished up the skirts which took some work, the doomcube stl files on the github are not modeled for a 300mm machine, theres 250 and 350 and also two different front skirt styles depending on the door cfg. The old ones left the skirts back 20mm like if you have added a clicky clack door on your...

All parts are being printed on my other Trident which makes life so much easier, when I built my first Voron it was with a creality CR6 which although heavily modified and about as tuned as a printer of that caliber can get the lack of any enclosure makes for printing ABS rather challenging but...

The Frame Dimensions - x500 x y500 x z670 Build volume - 300x300x300 2020, 2040 and 4040 extrusions machined by dllpdf mfg and powder coated in ground up fairie wings. The extrusions took quite awhile to receive due to high demand on a small company , they make really nice stuff so it was...

I build better printers than build logs and that will become evident rather quickly. I will post infrequently and forget to post important information and just like any good printer it will never be finished. More photos less details on this one will hopefully make it easier to keep up to date...