Hello, I am having problems with savox servo calibration. When I put MMU_SERVO POS=down it does not pass the moving channel. When it's powered against the top hat, fillament is enganged but after some (3/4) seconds it powers down, have a little "backlash", get's back to move channel and fillament is disengaged.
It looks like my top hats are too big or servo arm (using savox arm) it's too big.
Very strange. I had a V1 working and tryed to upgrade
It looks like my top hats are too big or servo arm (using savox arm) it's too big.
Very strange. I had a V1 working and tryed to upgrade