What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Solved Ebb 36 overheating


New member
Printer Model
V 2.4r2
Extruder Type
Clockwork 2
Cooling Type
Had a screw fail on the mount, loosening the high wire, leading to intermittent connection failures. Replaced the harness; ebb36 still boots at 200c, shuts off after, no visible damage. Likely, earlier harness replacement could have prevented this issue; kept restarting every 20h due to communication errors.

Moral of this story; don't ignore errors.