What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Klicky probe setup

Hot Toddy

Member
I'm having problems successfully configuring a klicky probe installed on a Trident.
From the Klicky Github page:

1682618029472.png



But if I set 'variable_enable_z_hop' to False, as the documentation suggests .... when homing Z it *RAISES* the bed the specified safe distance (into the nozzle!) rather than dropping the bed the safe distance away from the nozzle. What am I missing? When I set this parameter to True it behaves as I would expect. Is the documentation in error? Or am I missing something? As I have other issues with my setup that may be related. Many thanks for any help or suggestions.
 
I set mine as False as per docs and noticed it raised the bed. Took me a little bit to work out why but mine is now set to True and working as it should.
 
Top