What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

mcu unable to connect message

AVC

New member
Printer Model
2.4 R2 rev D
Extruder Type
Clockwork 2
Cooling Type
Stealthburner
Hello, this is my first Voron build so I do not really know what I am doing. I keep getting this error message (mcu 'mcu': Unable to connect) and I am not really sure why. I can ssh into the printer from the computer and both the Leviathan and Nitehawk board show up when finding the USB ID so it knows they exist? I will attach the klipper file and a screenshot of the error message. lmk if I need to include any other information.
The printer is a LDO voron 2.4 R2 rev D with a raspberry pi 4b.
 

Attachments

  • mcu error.PNG
    mcu error.PNG
    122.6 KB · Views: 2
  • klippy (3).log
    klippy (3).log
    56.6 KB · Views: 2
Two problems stand out in your log.

1. usb-STMicroelectronics_STM32_Virtual_ComPort_3561384D3530-if00 does not sound like a board that's been successfully flashed with klipper firmware.

2. You need to use the full path. So, for example /dev/serial/by-id/usb-STMicroelectronics_STM32_Virtual_ComPort_3561384D3530-if00
 
Top