New voron, help needed for the sd card filles

[Gimmer]

Hey everyone,

I’ve got a Voron printer (see pictures) and I’m trying to get it up and running, but I’m currently stuck on the Raspberry Pi / Klipper setup.

I’ve already flashed the SD card using the official MainsailOS guide (Raspberry Pi Imager + MainsailOS), but I’m not very confident with the next steps and configuration.

Would anyone be willing to help me generate or check the necessary config files (printer.cfg, etc.) so I can get everything running?

For now, I’m planning to keep things simple and use the standard Z endstop instead of Klicky.

Any help, advice, or pointers would be hugely appreciated

Thanks in advance!

https://docs.mainsail.xyz/mainsailos/getting-started/raspberry-pi/

Install till step 6

 

[bomtarnes]

Our documentation site should have what's needed in terms of getting Klipper flashed onto your SKR board: https://docs.vorondesign.com/build/software/

We also have example configurations for the switchwire here: https://github.com/VoronDesign/Voron-Switchwire/tree/master/Firmware

For more "real time" support I would strongly recommend joining our Discord server where we can talk things through step-by-step as needed- https://discord.gg/voron