PRINT_END Don't do anything

[Franquicia]

Printer Model

Voron 2.4

Extruder Type

Clockwork 2

Cooling Type

Stealthburner

Hi everyone. After install Kamp for adaptative bed mesh, my 2.4 stop the toolhead at the end of the print and don't do any gcode from the Print_end macro (in macros.cfg). But if I put the same Print_end in the slicer then It works.

Anyone knows the reason for this

I use cartographer.

When I arrive at home I'll try to upload the macro.

(My apologices for my bad english)