tianyi7250
Member
- Cooling Type
- Stealthburner
Where can I find this hot end model?
I can't find it. thank you
VORON Design
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!
Question Which stl model is used for this hotend? I didn't find it.
- Thread starter tianyi7250
- Start date
Where can I find this hot end model?
I can't find it. thank you
bomtarnes
Member
On aliexpress: https://www.aliexpress.com/item/1005008237922249.html
Other popular hotends in this format include the Sailfish and TZ-V6.
Other popular hotends in this format include the Sailfish and TZ-V6.
tianyi7250
Member
tetra
Member
What's odd is that this appears to be a triangle-lab hotend, but this model does not exist on their site. It is similar to the TZ 2.0, but not exactly the same. Looks like it might be a knock-off of triangle's designs. I'd go here to checkout what they have directly:
Pretty sure it's a Bambu X1c clone.What's odd is that this appears to be a triangle-lab hotend, but this model does not exist on their site. It is similar to the TZ 2.0, but not exactly the same. Looks like it might be a knock-off of triangle's designs. I'd go here to checkout what they have directly:
tianyi7250
Member
Which stl model is used for this hotend? I didn't find it.
You didn't found it because there is no official release for this hotend, Stealthburner came to the world way before Bambu Lab printers were a thing. You may need to search for a mod, which I have no doubt is already available.
It is still the same as a tz 3.0 are yet another bambu clone. tz 2.0 works quite well in my V2 and i have another v2 with it as well.
