z probing speed

[3dCase]

Hi guys and girls,
I recently went with a cartographer and loving it. The only thing I now want to do is to shorten the QGL sequence. in my code of the QGL it does not state any speed at all. So where do I override the default 5mm/s probing speed. Funny but the cartographer is also not having a speed setting in its code but it moves easily twice as fast to probe the bed. That is what makes me think to change the QGL speed also.
I know I can change the moves to the new position, and make the new positions closer together, but the probe speed is the one that is really bugging me right now. Please somebody tell me where to set this parameter?

 

[jass_on]

In ther [Stepper_z] section of your config look for

homing_speed: 15
second_homing_speed: 3

See if that helps

 

[3dCase]

In ther [Stepper_z] section of your config look for

homing_speed: 15
second_homing_speed: 3

See if that helps

Will do after work but pretty sure all these entries are missing. Might risk putting them in and see, thanks