Recent content by Corunir

They seem to only be problematic with PLA

I use eSun ABS+ exlusively, never had the slightest issues with layer adhesion, bed adhesion or diameter variation. From what I gathered from reports, most people that did experience problems bought from non-reputable vendors or at great discount so it might be a question of it actually being...

24V tap pcb is under investigation for reported problems, initial reports point to a knockoff component that is specific to 24V pcbs. lab4450 are known for using genuine and well soldered parts so that might explain why yours works

Search for solid_infill_below_area, reply with value

Since you are using bat85 diode, you can connect it to any endstop port, and yes you can just move it from z MCU to main MCU. Bat85 is there to protect the MCU from a probe failed in closed state with unexpectedly high voltage

Those two are not really comparable, Revo isn’t a HF hotend. Rapido is HF but doesn’t suffer from oozing and clogs like other HFs. I would always vote for Rapido.

Shelly PRO 1PM is a DIN mounted relay with power consumption meter and WIFI+LAN connection. It is costly but fits this purpose perfectly plus it gets you extra features and can be controlled from anywhere, not just from the PI. If you are using home assistant it has native integration. It can...

I host my own gitlab instance and keep configs for all my printers in their own repo. I don’t see the need to backup the whole SD card, when only a fraction of that space is actually useful (configs). Same thing goes for slicer profiles, it is a lot easier to keep them in sync across multiple...

Have you tried official Phaetus ones? I used Dragon SF for a couple hundred hours and original sock is still as good as new

As long as you have a bowden coupler on your extruder, there are no obastacles for using ercf.

For now, we still do support via Discord only. Proper way would be opening an engineering ticket.

Looking good 😀. Those Wera tools are awesome, I use the same set.

There is a mod for CW2 that uses PC4-M6 passthrough coupler. It is only present in no_toolhead_sensor branch https://github.com/EtteGit/EnragedRabbitProject/tree/no_toolhead_sensor/Toolhead/Stls/CW2

It is, that is exactly what would solve your problem and even though you can feed filament through the max, you can just ignore it and feed from the top. https://dev.vorondb.com/printer/12/ I am currently sourcing stuff for max and currently still use duo XL. Until Max is complete I have VEFACH...

Fair enough, but why would feeding filament from the top pose a problem? Mine is also fed from the top due to ERCF