Recent content by korser

I spoke to LDO since and they think the harness cable from the Toolhead PCB to the Frame PCB needs to be replaced. They will send me a new one. Kudos to their super responsive support. I do t try replacing the cable from the frame PCB to the pico. Hopefully that’s not the issue. In the mean...

It's working correctly when directly plugged into the SKR Pico Board. Either the Toolhead PCB or Frame PCB is causing issues. I'm not sure how to check which one has the issue. Is this something I can get LDO to replace?

You can see it in this gif when I tried to extrude 10mm it's a bit hard to make a gif small enough for the upload limit. Hopefully it's clear what's happening.

That's what I thought that something might be stuck but no. I removed the toolhead and took it apart. I removed the gears to make sure nothing was stuck. Everything runs freely and smoothly when I turn the gears. I even tried running the motor not attached to the toolhead and I can still hear...

I recently build a LDO v0.1 with an upgrade kit to v0.2 about three months ago. I've been happily printing for about 2 months. A few days ago my printer stopped in the middle of an ABS print. I checked the log after rebooting and it seems the connection to the mcu was lost. I saw a bunch of...

I‘even been debating between a 250 and 300 the last few days but decided to go with a 300 cube if possible. I bought a few things I know for sure I would be needing or changing whether I take a LDO kit or self sourced. CAN Bus equipment and Hotend. I’m still going through the exercise of...

Thank you that's all great feedback. I had no idea about the inverted electronics mod. That seems way more convenient and easier, thanks @red6rick ! @ZeroBrain I think I'm more how you've described yourself. I don't want to be cheap and get the lowest price possible. At the same time I don't...

Hi, I'm looking for advices on building a Trident. I've been wondering if I should use a kit or source it myself. Some background info. I've been printing for a few years on a Prusa Mini, I got one of the early kit. While it's a solid printer it's slow and the build volume is relatively small...