Recent content by snow 3dp

so i got everything working pretty well other then the temp on the extruder going straight to full temp then to 150c for tap. i will look into that further when i get some time. thank you for all your help i owe you a proverbial beer.

i ordered klicky probe and a hartk sexbolt kit they should be here Nov 6th. so heres the question should i put more time into Tap just to get the experience or should i just wait until i get klicky? i was always planning on going the klicky route because i never did like the thought of the...

well i got the looping issue handled... thank you AGAIN! but now with the better start gcode i get a status heating error so i tried just a simple start gcode and it homes, QGL and errors with extruder temp to low and shuts the heaters off. would that be an issue with my start gcode in the...

awesome thank you again. i really appreciate you taking the time to help me

hopefully this is what you need. sorry i have been printing for about 4 years but when it comes to klipper and especially anything to do with Gcode im 100% a noob

at the moment all G32 homing and QGL Gcode are commented out. let me know if you need anything else i will see what i can do ##################################################################### # Macros ##################################################################### #[gcode_macro...

here's my klippy.log let me know if i did that right

I will post that when I get home this evening.

This morning I commented out the G32 gcode manually homed and QGL and other then first heating to 260c it started and ran great so 8 believe it's an issue with the G32 commands or a combination of slicer gcode and G32

Yes i did I'm using orca slicer. Did I miss something? I'm still trying to learn how gcode work so high probability I screwed something up.

I tried that start Gcode and same thing in terms of the start routine looping. i can live with the hotend heating to full temp then cooling down to 150. but the looping issue not so much. this morning I commented out the entire G32 QGL start Gcode and manually homed and ran QGL and it started...

what is the issue here? i have been chasing my tail For days with start Gcode. the hotend heats to 260C from slicer settings instead of straight to 150c then it cools to 150c for tap it then homes, QGL, heaters off, QGL, home, QBL, Error "Extrude below minimum temp See the 'min_extrude_temp'...

so no errors to start but the printer heated to 260C from slicer settings then to 150c for tap it then homed, QGL, heaters off, QGL, home, QBL, Error "Extrude below minimum temp See the 'min_extrude_temp' config option for details" what would cause it to loop?

I originally started with a simple start gcode but kept getting hotend and verious other errors and a search for said errors yielded no results my simple mind could understand. With the example you gave do i need to change anything specific other then my printer size in combination with my...

HELP PLEASE!! start print seems to be looping. it will heat hotend, cool hotend, home, QGL , home, wait and start again then it will print. i have been chasing my tail for about 2 weeks with the start gcode and tried every start gcode i could find. I'm still learning how to understand it all but...