Recent content by TheDuke96

Mission abort! I solved it myself. Turns out the Formbot kit isn’t up to spec and the 300mm print bed is a bit wider than it should be, therefore the mentioned measure for the print bed mounting, inside the manual, doesn’t work. I had to mount the print bed further in the front and now the...

Hi, My Voron 2.4r2 is experiencing some print quality issues, specifically with layer stacking. I've already calibrated the E-steps, performed PID autotuning, and ensured the first layer is good. I've also calibrated the filament (heat, flow, pressure advance), and while it prints with an...

Thanks for the answer, I’m surprised it indeed worked, the noise is gone, I could swear I tried it before with no success. I did further testing and found out using stepper dampeners, or simple rubber washers did nothing. When I changed to the E3D High Torque Motors, all movements, X Y and...

Hello, I’m new here. This is my first post. I finally treated myself to a Voron 2.4r2 Pro from Formbot, along with the Chaoticlabs CNC Parts and CNC Tap. Building it took a while, but I made it and it has already printed a bit. However, there’s one thing that bothers me. On diagonal movements...