What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Axis movement errors

Motofan91

New member
Printer Model
Voron 2.4
Voron 2.4 new build, I have everything pretty much buttoned up and beginning to test movement. I run the stepper-buzz and have both directions correct for X and Y. When I home X, it moves in a straight line to the switch, triggers it but when it backs off it kind of vibrates and moves X- but also moves the Y axis. same when homing Y. Now, when I move the X in the minus direction it vibrates a little and moves the Y axis. I cheated the switches and homed a bit away from full travel. No mater if I move the X or Y in the minus direction it vibrates and moves both axis.. X+ direction works perfectly. Any insight?
Using a Spider MCU with mainsail web interface.

Thanks in advance
 
Top