Could really use some help on this one as I have run out of ideas. 6 weeks ago I performed a update which cause the UUIDs to stop working. There was a patch released to resolve this but unfortunately didn't work so had to reinstall software. After a successful software install which I had to use the patch, I am now getting the above problem. I have installed a new cat6 shielded cable and a new high-end USB type c as well as trying others. As far as I can tell, everything is stable until I try to hate up the hot end then after about 5 to 15 seconds I get the above issue. I have tried disconnecting, hot end and same results. The machine was running perfectly before the software update. Any help would be appreciated.