joey120373
New member
I've seen a few pics, and a short video to two, about a "Dume cube" mod. From what I gather, it is a frame upgrade or mod for the v2.4 or even V0/ micron, that has rounded corners and a kinda double thick frame. This looks like it would allow a fridge type door, and double walled side panels. I have a micron In the works, and if I wanted to shell out another few hundred, I could get a color matched frame, Dume cube upgrade kit and pannels. Not sure it's worth it, if there was a kit available that was just black like my frame I might consider it.
I was just wondering if there was more info available about this mod, who did it and why, what are the benifits, drawbacks and is there anything like a build guide? To me it looks like it could offer a stiffer frame and better chamber sealing. But I'm not sure either of those are really needed. But it does look cool, so there's that.
I have googled it a few times , and I usually end up with just links to extrusion kits, short videos or just build pics. Wondering if there is more out there or if this is just a "order the parts and figure it out " kinda thing.
I was just wondering if there was more info available about this mod, who did it and why, what are the benifits, drawbacks and is there anything like a build guide? To me it looks like it could offer a stiffer frame and better chamber sealing. But I'm not sure either of those are really needed. But it does look cool, so there's that.
I have googled it a few times , and I usually end up with just links to extrusion kits, short videos or just build pics. Wondering if there is more out there or if this is just a "order the parts and figure it out " kinda thing.
