error Communication timeout during homing probe on mellow SB2040

[Elijah]

Printer Model

VORON 2.4r2

Extruder Type

Clockwork 2

Cooling Type

Stealthburner

my build VORON 2.4r2 (by Fysetc) based on
Rpi 3B+
Spider 2.3
mellow UTOC
mellow fly sb2040
voron tap(24v) by fysetc


good afternoon, everyone. I get a constantly annoying error. in the process of executing homing or QGL, I get an error Communication timeout during homing probe. what could be the reason?

 

[Nordlicht77]

Hello
In Raspberry, look for the entry TRSYNC_TIMEOU from 0.025 to 0.050 or even 0.060
in the file /home/pi/klipper/klippy/mcu.py
Un restart Klipper

Greet
Martin

 

[Elijah]

Hello
In Raspberry, look for the entry TRSYNC_TIMEOU from 0.025 to 0.050 or even 0.060
in the file /home/pi/klipper/klippy/mcu.py
Un restart Klipper

Greet
Martin

Thank you, I did. but klipper now says that he is "dirty") is it possible to make this correction more "gracefully"?