Failed Print ( Maybe Layer Shift )

[umutkarab]

Printer Model

Voron 2.4R2

Extruder Type

Galileo

Cooling Type

Stealthburner

Hello everyone,

I have Voron 2.4R2 with Stealthburner and Galileo 2 Extruder. This print was printed in PETG.
Recently I got this big failed print and I am not sure why it happened. Extrusion seems fine, I re-tested after the print and it extruded completely fine without any effort. It seems like a layer shift or any kind of motion problem. I am attaching 3mf file, gcode and the photo of the failed print.

I would be glad if anyone could point out the things I how to check or fix.

Thanks.

 

[MichaelOToole]

Attached file looks different, orientation of parts on left differ, also second part from left looks like it has a circular base, again not in attached file?

PETG is prone to warping, wonder if it did and the nozzle hit this part and possibly pulled it around for a few layers...

A good reason/argument to install a time-lapse camera...

 

[lord-carlos]

My guess would be something de-tached from the build plate. Either by warping or something curled up and the nozzle it it.
But that is just a guess.