What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Question Filament Card Caddy printing quality problem

leeeboo

Member
Printer Model
VORON 2.4
Extruder Type
Clockwork 2
Cooling Type
Stealthburner
I encountered an issue while printing the "Filament_Card_Caddy" model. There is a depression appearing on the side where the VORON logo is printed. I checked the slicing and printing paths and noticed that the depression occurs at the starting and ending points of the last outer wall. I wonder if anyone knows how to solve this problem. Additionally, I noticed that there is consistently poor print quality occurring in the same spot during printing. I am unsure about the cause of this issue; could it be related to slicing settings? Any help would be greatly appreciated. Thank you in advance for your response.
 

Attachments

  • IMG_5297.jpeg
    IMG_5297.jpeg
    910.6 KB · Views: 14
  • IMG_5298.jpeg
    IMG_5298.jpeg
    939.9 KB · Views: 14
  • IMG_5300.jpeg
    IMG_5300.jpeg
    718.3 KB · Views: 15
  • IMG_5301.jpeg
    IMG_5301.jpeg
    905 KB · Views: 14
Hi, check in G-code preview or slicer whether these are not spots where it placed Z seam.
 
Top