What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Question Gantry issues

Laserbea4k43

Well-known member
So it seems that when my gantry reaches a certain point on the y axis, its path curves a bit.
I've come to this conclusion while having problems printing PLA and switching to ABS.
It's 10x more pronounced with PLA but you can still see traces of the problem in ABS prints.
When I do the rack test, my tool head doesn't move, should i still loosen all of the joints on my gantry in an attempt to realign anyway, or is there another problem?
 
I probably shouldn't have tested with a 17 hour print 😅
did a lazy de-rack and the problem isn't so bad. I'll do a full de-rack tomorrow....
 
Top